BFT remotes

BFT, an Italian maker of gate motors, uses the rolling-code Mitto range.

Models covered:BFT Mitto B RCB 2BFT Mitto B RCB 4

Showing the single result

BFT Mitto B RCB 2 / 4 compatible remote

€19.90
It replaces your BFT Mitto B RCB 2 / 4 remote.
Choose This product has multiple variants. The options can be chosen on the product page

How to recognise your BFT remote

Turn it over: three clues are all you need to choose the right one.

  1. 1

    Its model number

    On the back: Mitto B RCB 2 or Mitto B RCB 4, sometimes written B RCB02 or B RCB04.

  2. 2

    Its frequency

    433.92 MHz. The old grey BFT remotes, on 30.875 MHz, aren't suitable.

  3. 3

    Its buttons

    2 or 4 buttons: the last digit of the model number.

The pitfall to avoidThe Mitto Cool (C2, C4) is a different BFT range: check the model number before you buy.

Your questions about BFT remotes

Any other question? Write to us, with a photo of the back of your remote.

How do I program a BFT Mitto remote?

Within a metre of the control unit, press the hidden button on the back of the working remote for about a second, then the button on the new one. If the gate starts moving, the sequence was too slow: start again.

Where is the hidden button on the Mitto?

It's a small hole on the back of the remote: you press it with the tip of a paperclip. No hidden button? Press the top two buttons together until the light comes on.

How can I be sure the BFT remote is the right one?

Compare three things with your current remote: the model number on the back, the frequency and the number of buttons. If all three match, it's the right one. If in doubt, send us a photo of the back: we'll reply before you buy.